• Skip to primary navigation
  • Skip to main content
  • Skip to footer
American Rental Services

American Rental Services

Aerial High-Lift Equipment Re-Rent Company

  • About
    • How It Works
  • Equipment
    • By Type
      • Telescopic Boom Lifts
      • Articulating Boom Lifts
      • Telehandlers
      • Scissor Lifts
      • Air Compressors
    • By Brand
      • Genie
      • JCB
      • JLG
      • Manitou
      • MEC
      • SkyJack
      • Sullair
  • Get Quote
  • Inspection Forms
  • Blog
  • Contact
You are here: Home / Aerial Lift Safety / What to Do Before Operating an Aerial Lift (OSHA Safety)

What to Do Before Operating an Aerial Lift (OSHA Safety)

September 1, 2022 by Tom Saxelby

What to Do Before Operating an Aerial Lift (OSHA Safety)

Per OSHA’s Aerial Lift Factsheet, below outlines what to do before operating an aerial lift, including pre-start and work zone inspections.

Pre-start Inspection

Prior to each work shift, conduct a pre-start inspection to verify that the equipment and all its components are in safe operating condition. Follow the manufacturer’s recommendations and include a check of:

Vehicle components

  • Proper fluid levels (oil, hydraulic, fuel and coolant)
  • Leaks of fluids
  • Wheels and tires
  • Battery and charger
  • Lower-level controls
  • Horn, gauges, lights and backup alarms
  • Steering and brakes

Lift components

  • Operating and emergency controls
  • Personal protective devices
  • Hydraulic, air, pneumatic, fuel and electrical systems
  • Fiberglass and other insulating components
  • Missing or unreadable placards, warnings, or operational, instructional and control markings
  • Mechanical fasteners and locking pins
  • Cable and wiring harnesses
  • Outriggers, stabilizers and other structures
  • Loose or missing parts
  • Guardrail systems

Do not operate any aerial lift if any of these components are defective until it is repaired by a qualified person. Remove defective aerial lifts from service (tag out) until repairs are made.

Work Zone Inspections

Employers must assure that work zones are inspected for hazards and take corrective actions to eliminate such hazards before and during operation of an aerial lift. Items to look for include:

  • Drop-offs, holes, or unstable surfaces such as loose dirt
  • Inadequate ceiling heights
  • Slopes, ditches, or bumps
  • Debris and floor obstructions
  • Overhead electric power lines and communication cables
  • Other overhead obstructions
  • Other hazardous locations and atmospheres
  • High wind and other severe weather conditions, such as ice
  • The presence of others in close proximity to the work

For additional information on aerial lift safety, see the Aerial Lifts OSHA FactSheet.


American Rental Services focuses on re-renting aerial high-lift equipment to rental companies throughout North America. Partner with American Rental Services to improve your bottom line at no risk, using wholesale big booms and large-reach forklifts.

Share this post:

Share on X (Twitter) Share on Facebook Share on LinkedIn Share on Email

Filed Under: Aerial Lift Safety

Footer

Get Equipment Availability Notices

Receive email alerts about equipment availability in your area.

  • This field is for validation purposes and should be left unchanged.

Connect

  • LinkedIn
  • Telehandlers
  • Telescopic Boom Lifts
  • Articulating Boom Lifts
  • Scissor Lifts
  • Blog
  • Inspection Forms

Copyright © 2025 · American Rental Services · Sitemap · Web design by OptimWise