Company Name(Required)Name(Required) First Last Make(Required)Model(Required)Serial Number(Required)Hour Meter(Required)Current Annual Inspection Date Marked on Machine MM slash DD slash YYYY Hour Meter Reading Marked on Filters of Last Engine ServiceShould you have any questions, concerns, or have identified anything in need of service please contact ARS so corrective actions can be taken to remedy the problem(s)***The following checklist is used as a reference document for ARS, this does not replace or constitute an official Pre-Delivery or Frequent Inspection. It is the responsibility of the ARS lessee to perform and ensure that Pre-Delivery and Frequent Inspections are performed per manufacturer/ANSI guidelines ***ChassisWheels in Good Condition Including Rims, Tires, Lug Nuts(Required) Yes NoHydraulic Leaks Present(Required) Yes NoHydraulic Hoses in Good Condition(Required) Yes NoHydraulic Cylinders in Good Condition(Required) Yes NoAxles in Good Condition & Operational(Required) Yes NoSafety/Limit Switches in Place & Operational(Required) Yes NoSafety Decals in Place & Legible(Required) Yes NoTurntableTurntable Bearing in Good Condition(Required) Yes NoTurntable Rotate Assy in Good Condition & Operational(Required) Yes NoHoods / Guards in Place & Good Condition(Required) Yes NoHydraulic Leaks Present(Required) Yes NoHydraulic Hoses in Good Condition(Required) Yes NoHydraulic Oil Level is Full(Required) Yes NoEngine Coolant Level Full if Applicable(Required) Yes NoEngine Coolant Leaks Present(Required) Yes NoEngine Oil Leaks Present(Required) Yes NoEngine Oil Level Full(Required) Yes NoEngine Service is Current(Required) Yes NoEngine Exhaust System in Good Condition(Required) Yes NoFuel Leaks Present(Required) Yes NoFuel Tank Level is Full(Required) Yes NoGenerator if Equipped in Good Condition & Operational(Required) Yes NoBattery(s) & Terminals Along with Cables in Good Condition(Required) Yes NoElectrical Cables/Harness in Good Condition(Required) Yes NoSafety/Limit Switches in Place & Operational(Required) Yes NoSafety Decals in Place & Legible(Required) Yes NoBoom AssyBoom Structure/Welds in Good Condition(Required) Yes NoAll Pins & Keepers in Place(Required) Yes NoPower Track(s) in Good Condition(Required) Yes NoHydraulic Leaks Present(Required) Yes NoHydraulic Hoses in Good Condition(Required) Yes NoHydraulic Cylinders in Good Condition(Required) Yes NoBoom Chains/Cables in Good Condition(Required) Yes NoBoom Wear Pads Present & In Good Condition(Required) Yes NoElectrical Cables/Harness in Good Condition(Required) Yes NoSafety/Limit Switches & Sensors in Place and Operational(Required) Yes NoSafety Decals in Place & Legible(Required) Yes NoPlatform AssyPlatform Structure/Welds in Good Condition(Required) Yes NoPlatform Rotator in Good Condition(Required) Yes NoPlatform Floor & Skirt in Good Condition(Required) Yes NoPlatform Rails in Good Condition(Required) Yes NoPlatform Gate in Good Condition & Operational(Required) Yes NoElectrical Cables/Harness in Good Condition(Required) Yes NoSafety/Limit Switches & Sensors in Place and Operational(Required) Yes NoUpper Controls Clean and Operational(Required) Yes NoUpper Control Decals in Place & Legible(Required) Yes NoAll Required Documents in Manual Storage Box & Legible(Required) Yes NoCopy of Current Annual Inspection Paperwork in Manual Box(Required) Yes NoSafety Decals in Place & Legible(Required) Yes NoGeneral QuestionsMachine is Operational(Required) Yes NoAll Safety Systems Function Properly(Required) Yes NoMachine is Clean(Required) Yes NoAll Company Decals Have Been Removed from Machine(Required) Yes NoPictures(Required)Please submit pictures of the machine showing the Front, Back, Left Side, Right Side, Platform, and Upper Control Box Decals. Limit 10 pictures, up to 10 MB each.Additional Comments or ConcernsEmailThis field is for validation purposes and should be left unchanged.
