Maintenance Schedule
The maintenance procedures have been divided into subsections that include: Commissioning, Quarterly, Annually and Programmed maintenance intervals. The maintenance inspection report has been divided into general areas of the machine that include: Drive Chassis, Booms and Fork, Functions and Controls and Powertrain.
Failure to perform these procedures may result in poor performance, component damage and unsafe operating conditions. They are essential to safe operation, machine performance and service life.
- Commissioning: A series of required one time maintenance procedures to be performed at 50 and 150 hour intervals.
- Quarterly and Annually: A series of maintenance procedures to be performed quarterly or annually.
- Programmed: A series of maintenance procedures to be performed during a Pre-Delivery Preparation or based on machine operating hours.
Maintenance Inspection Report
The maintenance inspection report contains checklists for each type of scheduled inspection.
Make copies of the Maintenance Inspection Report to use for each inspection. Maintain completed forms for a minimum of 4 years or in compliance with your employer, jobsite and governmental regulations and requirements.
Source: https://manuals.genielift.com/Parts%20And%20Service%20Manuals/ServInspectionForms.htm
American Rental Services focuses on re-renting aerial high-lift equipment to rental companies throughout North America. Partner with American Rental Services to improve your bottom line at no risk, using wholesale big booms and large-reach forklifts.